3 thoughts on “What are the matters to pay attention to by hand -made DIY jewelry?”
Claude
In fact, there are a lot of things to DIY, especially some small things. I personally prefer to make some handmade jewelry. When you look at the finished products you make, you will feel particularly accomplished. If you like what you like, you should pay attention to the materials. In the Internet is not particularly popular on the Internet, do you make some small jewelry of the hot film? Take this, first of all, you need hot shrinkage, hot air guns, water -soluble color lead, scissors, gel, a small box, a small box , Grasson, glue, etc. make the key materials required for different accessories. If you do earrings, you need to do ear needles and ears. You can also make keychain. It use these materials to draw your favorite patterns on the hot shrinkage, make your favorite accessories, but there are many attention. Be sure to pay attention when it is matched. In the hand, the titer of titration is mixed with the correct proportion. When trimming the heat shrinkage, you must also pay attention to it. The thermal shrinkage is very easy to cut and it is easy to cut. . Some time ago, after I finished the heat shrinkage, I was equipped with a drop of glue to drop the glue. As a result, I forgot the time. It ’s not easy to get up. During the process of cleaning the measuring cylinder, the titer was made into my own hand. As a result, the hand was always sticky. The shower gel dish was tried. It took about fifteen minutes to wash it off. If for other handmade jewelry, the needle needs to be used for the fabric, and a approximate graphic is described on the fabric. This is convenient to cut it. For example: When you want to make a flower -style card, it is very necessary to be described in advance. There are many petals of the flowers, and many details need to be careful. It when making handmade jewelry, you must pay attention to whether there are children. Most of the pruning tools are relatively sharp. If there are children, it is not safe. In the place where you can't, you can also preserve some materials while protecting children, because children prefer to get things randomly. The materials for handmade jewelry must be well summarized, so as not to occur during the production process. The situation that cannot be found, even if this jewelry is completed, you still need to clean up the remaining materials. In order to try the next trial, avoid buying materials from new, spend some unnecessary time and money. The interest and inspiration are coming. Sometimes I think of it. Maybe I want to make the same type, different styles of handmade jewelry, retain the original original, retain the original original There are remaining materials, and the tools that have been used must be retained. It is very useful for making other handicrafts and other things. Is when buying handmade jewelry materials, you also need to pay attention not to buy too much to avoid waste. When making metal jewelry, you should pay attention to whether there is liquid in your hand. It is best to wear gloves.
Handmade DIY jewelry needs to pay attention to 1. In many cases, handmade DIY jewelry needs to be used for scissors. Some need to use needle wires, wrenchs, tiger clamps, rubber guns, knives and other things. You need to pay attention to safety. Especially when there is a child, we must prevent children from touching these things without your care. 2. Some friends just want to use or give away by yourself by yourself. There is no experience in handmade DIY jewelry before, so you must find some related video tutorials before handmade DIY jewelry and find to find Some precautions. This will bring a lot of convenience when hand -made DIY jewelry. After all, it is still difficult to find the doorway of the handmade DIY jewelry. 3. Before buying the material of the handmade DIY jewelry, you must think about what you want to do and search online to search for what materials are needed. Otherwise, you are likely to buy more materials and buy some unnecessary materials. Some raw materials used by handmade DIY jewelry are relatively short. If you do not buy it in time, it will cause waste. So it is best to think of what to do, buy it just to make this thing. 4, some handmade DIY jewelry such as buns, it is likely to use iron or copper products when making. When making these materials, it is best to ensure that you have no sweat in your hands, or you can bring gloves to do it. Once there are sweat on the raw materials of those iron or copper, those things are very easy to rust. If you do n’t do it well, you just make a handmade DIY jewelry. After two or three days, this jewelry starts to start born. Rust. 5, some handmade DIY accessories need to be used for fabrics. If you say according to Article 3 above, you can buy as much materials, you don’t want to waste it at all, then you are making tailoring fabrics. At this time, be sure to calculate how many fabrics need to be calculated, first drawing the shape of the scrubbing strokes. In fact, it is not only a fabric, but the same materials are the same. If you want to do it before you do it, you can avoid what the material is not used after you use it.
Handmade DIY is an eternal topic. From ancient production of sachets to making jewelry, girls' hobbies have not become different because of different time and space. But manual DIY is not an easy task, there are many things we need to pay attention to. 1. Preparation of preparation in the early stage. Before the manual DIY jewelry, we have to list a list and buy all the things we want to buy. This is very important, which is related to whether you can make DIY smoothly. I used to make a necklace. As a result, I didn't buy glass glue, there was no way to stick it. Later, I bought glass glue without a rubber gun, which made me messy. Therefore, you need to prepare what you want to buy in advance, so that you will not be busy, missing this. 2. See the tutorial of the handmade DIY jewelry in detail. In fact, there are many DIY tutorials on the Internet, some are pictures, and some are videos. You can observe how people do it first, and then do it by yourself, so that there will be a little bit in your heart, and you can avoid some small and bad places, or pay more attention to some difficulties. The handmade jewelry made in this way will be more beautiful, and you will be more confident in yourself. 3. Put a layer or newspaper on the table before starting work. The reason why you tell you a layer of cloth or newspaper is to not damage the table. Many of the handmade DIY jewelry need to use tweezers or glue. It's lost. So prepare a cloth or newspaper to isolate the table, so you can also open your hands when operating. The rest is not good at paying attention. In fact, handmade DIY jewelry is fun, and it is relatively simple. So if you are interested, you can try it immediately and make a necklace that belongs to your own.
In fact, there are a lot of things to DIY, especially some small things. I personally prefer to make some handmade jewelry. When you look at the finished products you make, you will feel particularly accomplished. If you like what you like, you should pay attention to the materials.
In the Internet is not particularly popular on the Internet, do you make some small jewelry of the hot film? Take this, first of all, you need hot shrinkage, hot air guns, water -soluble color lead, scissors, gel, a small box, a small box , Grasson, glue, etc. make the key materials required for different accessories. If you do earrings, you need to do ear needles and ears. You can also make keychain.
It use these materials to draw your favorite patterns on the hot shrinkage, make your favorite accessories, but there are many attention. Be sure to pay attention when it is matched. In the hand, the titer of titration is mixed with the correct proportion. When trimming the heat shrinkage, you must also pay attention to it. The thermal shrinkage is very easy to cut and it is easy to cut.
. Some time ago, after I finished the heat shrinkage, I was equipped with a drop of glue to drop the glue. As a result, I forgot the time. It ’s not easy to get up. During the process of cleaning the measuring cylinder, the titer was made into my own hand. As a result, the hand was always sticky. The shower gel dish was tried. It took about fifteen minutes to wash it off.
If for other handmade jewelry, the needle needs to be used for the fabric, and a approximate graphic is described on the fabric. This is convenient to cut it. For example: When you want to make a flower -style card, it is very necessary to be described in advance. There are many petals of the flowers, and many details need to be careful.
It when making handmade jewelry, you must pay attention to whether there are children. Most of the pruning tools are relatively sharp. If there are children, it is not safe. In the place where you can't, you can also preserve some materials while protecting children, because children prefer to get things randomly.
The materials for handmade jewelry must be well summarized, so as not to occur during the production process. The situation that cannot be found, even if this jewelry is completed, you still need to clean up the remaining materials. In order to try the next trial, avoid buying materials from new, spend some unnecessary time and money.
The interest and inspiration are coming. Sometimes I think of it. Maybe I want to make the same type, different styles of handmade jewelry, retain the original original, retain the original original There are remaining materials, and the tools that have been used must be retained. It is very useful for making other handicrafts and other things.
Is when buying handmade jewelry materials, you also need to pay attention not to buy too much to avoid waste. When making metal jewelry, you should pay attention to whether there is liquid in your hand. It is best to wear gloves.
Handmade DIY jewelry needs to pay attention to
1. In many cases, handmade DIY jewelry needs to be used for scissors. Some need to use needle wires, wrenchs, tiger clamps, rubber guns, knives and other things. You need to pay attention to safety. Especially when there is a child, we must prevent children from touching these things without your care.
2. Some friends just want to use or give away by yourself by yourself. There is no experience in handmade DIY jewelry before, so you must find some related video tutorials before handmade DIY jewelry and find to find Some precautions. This will bring a lot of convenience when hand -made DIY jewelry. After all, it is still difficult to find the doorway of the handmade DIY jewelry.
3. Before buying the material of the handmade DIY jewelry, you must think about what you want to do and search online to search for what materials are needed. Otherwise, you are likely to buy more materials and buy some unnecessary materials. Some raw materials used by handmade DIY jewelry are relatively short. If you do not buy it in time, it will cause waste. So it is best to think of what to do, buy it just to make this thing.
4, some handmade DIY jewelry such as buns, it is likely to use iron or copper products when making. When making these materials, it is best to ensure that you have no sweat in your hands, or you can bring gloves to do it. Once there are sweat on the raw materials of those iron or copper, those things are very easy to rust. If you do n’t do it well, you just make a handmade DIY jewelry. After two or three days, this jewelry starts to start born. Rust.
5, some handmade DIY accessories need to be used for fabrics. If you say according to Article 3 above, you can buy as much materials, you don’t want to waste it at all, then you are making tailoring fabrics. At this time, be sure to calculate how many fabrics need to be calculated, first drawing the shape of the scrubbing strokes. In fact, it is not only a fabric, but the same materials are the same. If you want to do it before you do it, you can avoid what the material is not used after you use it.
Handmade DIY is an eternal topic. From ancient production of sachets to making jewelry, girls' hobbies have not become different because of different time and space. But manual DIY is not an easy task, there are many things we need to pay attention to.
1. Preparation of preparation in the early stage. Before the manual DIY jewelry, we have to list a list and buy all the things we want to buy. This is very important, which is related to whether you can make DIY smoothly. I used to make a necklace. As a result, I didn't buy glass glue, there was no way to stick it. Later, I bought glass glue without a rubber gun, which made me messy. Therefore, you need to prepare what you want to buy in advance, so that you will not be busy, missing this.
2. See the tutorial of the handmade DIY jewelry in detail. In fact, there are many DIY tutorials on the Internet, some are pictures, and some are videos. You can observe how people do it first, and then do it by yourself, so that there will be a little bit in your heart, and you can avoid some small and bad places, or pay more attention to some difficulties. The handmade jewelry made in this way will be more beautiful, and you will be more confident in yourself.
3. Put a layer or newspaper on the table before starting work. The reason why you tell you a layer of cloth or newspaper is to not damage the table. Many of the handmade DIY jewelry need to use tweezers or glue. It's lost. So prepare a cloth or newspaper to isolate the table, so you can also open your hands when operating.
The rest is not good at paying attention. In fact, handmade DIY jewelry is fun, and it is relatively simple. So if you are interested, you can try it immediately and make a necklace that belongs to your own.