3 thoughts on “How to make silver jewelry by myself”
Lorenzo
The main tools for making silverware include horns, ring iron, scalpel, small hammer, stainless steel cooker, sloping board, sawing, gourd clip, welded board, crickets, tadpoles, welded rods, pillow woods, work tables, etc. The silver jewelry raw and auxiliary materials include: silver pieces, silver strips, silver wires, alum, borax, etc. The steps are as follows: 1. First of all, the silver jewelry we get is a block shape. Therefore, we must first soften the silver block and make the shape mold status prepared before. Generally, the shape is fixed. As long as the melted silver liquid is poured into the mill, and then it will be preliminated after cooling with water. 2. After the silver jewelry is initially formed, we can heat the silver jewelry with burning fire in fine polishing, so that the sizes can be determined at this time during the polishing process. 3, fine processing, this is the most critical step in the entire process. In fact, this process is also called "carving". The better the craftsmanship, the more refined the carved craftsmanship and the more beautiful. 4. When the finished product is finely built, it is washing the silver. You can repeatedly be beaten and barbecue on the silver jewelry. You can use the high temperature to bake the silver and heat it, then put it into the acid liquid, remove it and put it in the water, brush it with copper brushes, you can clean the white and bright, and finally create your favorite silver jewelry. This is the silver jewelry DIY.
The handmade making of silver jewelry should basically go through the process of melting silver, forging, feeding, making lead, carving, welding, and cleaning.
1, melting silver: The silver silver is usually large. First of all, the large piece of silver must be smashed and placed in the furnace melting. After the silver starts melting, the copper mold is cast with a long handle clamp.
2, forging: Start forging into the needs of the need in the heart when it is hot. This step is sometimes repeatedly performed because it cannot be made at once. 3, feeding: Compared with the designed silver decoration documents, the silver film is slightly larger than the document, leaving a certain amount of processing waste. 4, leading trustees: The role of lead -trunk is to support and fixed silver pieces that need to be processed for further production. Place the coarse -processed silver tablet in the sandbox, inject the melted lead into it, and cooled it. 5, precision processing: This process includes the process of hammer, carved, carved, and filament knotting, which is the most critical step in the entire process. This process is also called "carving". The tools used by carving are a small hammer and several crickets. There are various types of tadpoles with sharp, round, flat, crescent -shaped, petals and other types. They are selected as needed. During the processing, the left hand is held by the hammer, like the painter's pen, the heart is corresponding, and a group of groups of vivid and patterns are carved out. At this time, the key is to work in the silver jewelry. At this time, the carving is subtle, showing the carefulness and accuracy of the craftsman. Among them, the filament knot tests the master's carefulness and endurance, and each piece of flower jewelry is the crystallization of heart and physical strength. 6, welding: silver jewelry that needs to be welded, welded at the interface, and welded welded with a welding gun. 7, silver washing: After repeated beating and barbecue, the surface of the silver jewelry will be black or stained with impurities. Bake the silver in the high temperature with the fire, then put it into the acid liquid, remove it and put it in the water, use copper brush, and clean the white and bright. If on the silver jewelry, it is necessary to burn the blue. Whether the cooked Cui and Lan are uniform and whether the colors are beautiful. It is completely mastered by the craftsman based on experience. It is also one of the standards for testing the level of technical level of craftsmen.
My modern handmade silver jewelry production, although it has improved on the tools, it still adheres to traditional handicraft skills.
The main tools for making silverware are sheep hammers, ring iron, scalpel, small hammer, stainless steel small pot, shredded board, saw, gourd clip, welded board, tadlion, welding torch, hanging machine, hanging machine , Pillowing wood, work table, etc. The silver jewelry raw and auxiliary materials include: silver pieces, silver strips, silver wires, alum, borax, etc. 1) Line cutting: Use different sizes of molybdenum wire (a metal, high hardness), cutting machine with a wire, cut it out at a very slow speed, and then polish all the hand. The difficulty style, the slower the shipment. ) Precision die casting: first carved the sample with wax, then put it in a dedicated gypsum, remove the wax, and use 1500 ~ 2000 degrees to dissolve the raw material, which is dissolved in raw materials, and the raw material is dissolved. Pour into the gypsum mold, then press the mold, remove the mold, and then polish all the hands. Because die -casting requires a dedicated gypsum mold . The price is different. 3) Polating surface: Polish the polished wafer on the high -speed rotating cotton polishing wheel, and then contact the cloth wheel to make the surface light and reflect the light. ) Sand -pulling surface: The effect of using sandpaper to make the surface of the jewelry into a frosted effect (the light is not reflected), so that there is a fruit on the surface. 5) Sand spray: The main working principle of sand spraying is: placing sand (extremely fine abrasives, silver gray) in water, and spraying the mill at high speed through the milling gun to the surface of the steel jewelry. A layer of silver -gray coating. The jewelry is more high -end, and the color is loved by people from various products. ) Vacuum plating: Vacuum plating mainly includes ionic electroplating, vacuum steaming, sputtering, sputtering, sputtering Several types of nano -electroplating method of plating and ion electroplating) They are all used under vacuum conditions to deposit various metal films on the surface of the object through distillation or sputtering. At the same time, there are points for fast production speed and difficulty, but the price is also high. There are fewer metal types that can be operated. It is generally used for high -end jewelry and watches.胶，硬塑料) 首先用高温把饰品加热, 再把树脂涂在首饰上，因处理，所以在佩带过程中是不易脱落的.rn8 ）镶锆石：主要分两种，一种是It is very solid with jewelry -specific glue. The other is the complex of the machine, that is, fine and firm, but the price is more expensive than glue. 9) Carbon fiber: It is expensive, but it is used on jewelry. As the sight moves, the effect is three -dimensional and beautiful. Carbon fiber is a fiber -shaped carbon material. It uses some carbon -containing organic fibers, such as nylon wire, shredded wire, artificial silk and other raw materials. Strengthen thermal carbonization under pressure. Carbon fiber has new materials with conductivity, large strength, small density, and corrosion resistance and high temperature resistance.
n00:00 / 01: 4770% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increased by 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds ←: single fast retreat 5 seconds Press hold down and hold it holding up. Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
The main tools for making silverware include horns, ring iron, scalpel, small hammer, stainless steel cooker, sloping board, sawing, gourd clip, welded board, crickets, tadpoles, welded rods, pillow woods, work tables, etc.
The silver jewelry raw and auxiliary materials include: silver pieces, silver strips, silver wires, alum, borax, etc.
The steps are as follows:
1. First of all, the silver jewelry we get is a block shape. Therefore, we must first soften the silver block and make the shape mold status prepared before. Generally, the shape is fixed. As long as the melted silver liquid is poured into the mill, and then it will be preliminated after cooling with water.
2. After the silver jewelry is initially formed, we can heat the silver jewelry with burning fire in fine polishing, so that the sizes can be determined at this time during the polishing process.
3, fine processing, this is the most critical step in the entire process. In fact, this process is also called "carving". The better the craftsmanship, the more refined the carved craftsmanship and the more beautiful.
4. When the finished product is finely built, it is washing the silver. You can repeatedly be beaten and barbecue on the silver jewelry. You can use the high temperature to bake the silver and heat it, then put it into the acid liquid, remove it and put it in the water, brush it with copper brushes, you can clean the white and bright, and finally create your favorite silver jewelry. This is the silver jewelry DIY.
The handmade making of silver jewelry should basically go through the process of melting silver, forging, feeding, making lead, carving, welding, and cleaning.
1, melting silver: The silver silver is usually large. First of all, the large piece of silver must be smashed and placed in the furnace melting. After the silver starts melting, the copper mold is cast with a long handle clamp.
2, forging: Start forging into the needs of the need in the heart when it is hot. This step is sometimes repeatedly performed because it cannot be made at once.
3, feeding: Compared with the designed silver decoration documents, the silver film is slightly larger than the document, leaving a certain amount of processing waste.
4, leading trustees: The role of lead -trunk is to support and fixed silver pieces that need to be processed for further production. Place the coarse -processed silver tablet in the sandbox, inject the melted lead into it, and cooled it.
5, precision processing: This process includes the process of hammer, carved, carved, and filament knotting, which is the most critical step in the entire process. This process is also called "carving". The tools used by carving are a small hammer and several crickets. There are various types of tadpoles with sharp, round, flat, crescent -shaped, petals and other types. They are selected as needed. During the processing, the left hand is held by the hammer, like the painter's pen, the heart is corresponding, and a group of groups of vivid and patterns are carved out. At this time, the key is to work in the silver jewelry. At this time, the carving is subtle, showing the carefulness and accuracy of the craftsman. Among them, the filament knot tests the master's carefulness and endurance, and each piece of flower jewelry is the crystallization of heart and physical strength.
6, welding: silver jewelry that needs to be welded, welded at the interface, and welded welded with a welding gun.
7, silver washing: After repeated beating and barbecue, the surface of the silver jewelry will be black or stained with impurities. Bake the silver in the high temperature with the fire, then put it into the acid liquid, remove it and put it in the water, use copper brush, and clean the white and bright.
If on the silver jewelry, it is necessary to burn the blue. Whether the cooked Cui and Lan are uniform and whether the colors are beautiful. It is completely mastered by the craftsman based on experience. It is also one of the standards for testing the level of technical level of craftsmen.
My modern handmade silver jewelry production, although it has improved on the tools, it still adheres to traditional handicraft skills.
The main tools for making silverware are sheep hammers, ring iron, scalpel, small hammer, stainless steel small pot, shredded board, saw, gourd clip, welded board, tadlion, welding torch, hanging machine, hanging machine , Pillowing wood, work table, etc.
The silver jewelry raw and auxiliary materials include: silver pieces, silver strips, silver wires, alum, borax, etc.
1) Line cutting: Use different sizes of molybdenum wire (a metal, high hardness), cutting machine with a wire, cut it out at a very slow speed, and then polish all the hand. The difficulty style, the slower the shipment.
) Precision die casting: first carved the sample with wax, then put it in a dedicated gypsum, remove the wax, and use 1500 ~ 2000 degrees
to dissolve the raw material, which is dissolved in raw materials, and the raw material is dissolved. Pour into the gypsum mold, then press the mold, remove the mold, and then polish all the hands. Because die -casting requires a dedicated gypsum mold
. The price is different.
3) Polating surface: Polish the polished wafer on the high -speed rotating cotton polishing wheel, and then contact the cloth wheel to make the surface light
and reflect the light.
) Sand -pulling surface: The effect of using sandpaper to make the surface of the jewelry into a frosted effect (the light is not reflected), so that there is a fruit on the surface.
5) Sand spray: The main working principle of sand spraying is: placing sand (extremely fine abrasives, silver gray) in water, and spraying the mill at high speed through the milling gun to the surface of the steel jewelry. A layer of silver -gray coating. The jewelry is more high -end, and the
color is loved by people from various products.
) Vacuum plating: Vacuum plating mainly includes ionic electroplating, vacuum steaming, sputtering, sputtering, sputtering Several types of nano -electroplating method of plating and ion electroplating) They are all used under vacuum conditions to deposit various metal films on the surface of the object through distillation or sputtering. At the same time, there are points for fast production speed and difficulty, but the price is also high. There are fewer metal types that can be operated. It is generally used for high -end jewelry and watches.胶，硬塑料) 首先用高温把饰品加热, 再把树脂涂在首饰上，因处理，所以在佩带过程中是不易脱落的.rn8 ）镶锆石：主要分两种，一种是It is very solid with jewelry -specific glue. The other is the complex of the machine, that is, fine and firm, but the price is more expensive than glue.
9) Carbon fiber: It is expensive, but it is used on jewelry. As the sight moves, the effect is three -dimensional and beautiful. Carbon fiber is a fiber -shaped carbon material. It uses some carbon -containing organic fibers, such as nylon wire, shredded wire, artificial silk and other raw materials. Strengthen thermal carbonization under pressure. Carbon fiber has new materials with conductivity, large strength, small density, and corrosion resistance and high temperature resistance.
n00:00 / 01: 4770% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increased by 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds ←: single fast retreat 5 seconds Press hold down and hold it holding up. Here you can drag no longer appear in the player settings to reopen the small window shortcut key description